Step 5: Install Your Streaming Servers Follow
Introduction
To serve as a guide for how to locate all server machines and how to connect them to the Switch
Time Required
1 hour
Tools & Equipment Required
- Box Cutter
- Streaming Server machines
Connect the Streaming Servers to the Network Switch
Locate the Streaming Servers
- Find all tower computers with the label Streaming Servers.
Setup the Streaming Servers
- Place the streaming servers on a flat surface next to the network switch.
- Connect each of the Streaming Servers to a power outlet.
- The machines will automatically turn on when connected to power.
Connect the Streaming Servers to the Network Switch
- Connect Cat 6 cables from the Streaming Servers to port 11 - port 18 on the Network Switch.
- Note: If you only have 6 streaming servers, then use Port Numbers 11 to 16.
| Streaming Server number | Switch Port number |
| 1 | 11 |
| 2 | 12 |
| 3 | 13 |
| 4 | 14 |
| 5 | 15 |
| 6 | 16 |
| 7 | 17 |
| 8 | 18 |
For systems with two network ports, the network port lower on the PC should be used
Article Keywords/Phrases:
How to set up Streaming Servers
How to install WiFi
How to use Streaming Servers
Comments
0 comments
Article is closed for comments.