Step 13: Hook Installation

Introduction

Follow these instructions to install the hooks that will be used for the headsets and the controllers.

Time Required

2 hours

Tools & Equipment Required

• Box Cutter
• Hooks
• Measuring Tape
• Pen
• Drill
• Screwdriver
• Phillips Head Attachment

---

On this page:

  Hook Installation

---

Hook Installation

• Locate the box that's labelled Equipment Wall Fitout.
  
  
• Measure and mark out the locations for the hooks prior to commencing the installation. The equipment wall and spares diagram can be found in the following: Equipment Wall Diagrams
• The equipment diagram is also used for Install Your Headset Chargers.

  Back to top

Article Keywords/Phrases: 

Put up hooks
Install hooks