Controller: Power on/off & LED Colour Guide (Hand Tracker)

Introduction

Controllers are how customers are able to interact with the games. There are two main components, the gun which has all the buttons and the tracker which is used to track the gun in the game.

---

On this page:

  Power Switch

  LED Colour Guide

---

Power Switch

• Move the "Power" button to the "On" position, it will take a few seconds.
• As you power it on, the LED on the controller will light up.

• This will also power on the Tracker as well automatically.

  Back to top

LED Colour Guide

The LED ball on the top of the controller has different meanings for each of the colours:

LED Colour	Meaning
White	Connecting. The controller is connecting to the Launcher.
Blue	Check connections. The missing connection between headset, controller and tracker. Messages on Launcher screen will provide more details.
Purple	Ready to gain tracking. The controller and headset are connected but do not have tracking.
Green	Ready to play. The controller and headset are connected and have tracking.
Red	Low battery. Charge the controller immediately.
Cyan	Unauthenticated. The controller needs to be authenticated before being able to be used.
Yellow	USB-C cable disconnected, this needs to be reconnected to the main PCB

The light on the Tracker also has several different meanings:

LED Colour	Meaning
Blue	Not connected to headset.
Green	Connected to the headset.
Red	Charging. If the controller is turned off it will display either a blue or green light.

Hand Tracker Firmware 2.0.0.62 or newer

Hand Tracker State	Hand Tracker LED Colour
Low Battery	Blink Red 250ms, Dim 250ms, repeat
Charging / Connected during charging	Solid Orange
Pairing Mode	Blink Blue 250ms, Dim 250ms, repeat
Connecting	Solid Blue
Connected	Solid Green
Connecting during charging	Blink Blue 1s, Orange 1s, repeat
Updating Firmware	Blink Blue 250ms, Red 250ms, repeat

 Back to top

Article Keywords/Phrases: 

Controller
Gen3 controller
Gen3 guns
Tracker