How do I Pair the Wrist Tracker?

Introduction

This article will guide you through the process of pairing the Wrist Tracker with the Headset. 

Time Required

5 minutes 

Tools and Equipment Required

• Game Master PC 
• Focus 3/Vision Headset
• Controller & Wrist Tracker

---

On this page:

  Pairing the Wrist Tracker

---

Pairing the Wrist Tracker

• Turn on a Headset and acquire the matching Controller.

Danger

Do not power on the Controller.

• Power on the Wrist Tracker only by short pressing the button near the LEDs. The LEDs on the tracker should light up green or orange.

• On the Launcher, select "Hardware". 

• Select the Headset you are pairing and click "Details".

• Select "Pair Tracker with headset".

• Select “Start Tracker Pairing”.

• Press and hold the Wrist Tracker button for 3 seconds until both lights are flashing blue.
• Continue holding the button until the lights flash blue twice, then release.

• Once the pairing is complete, the Wrist Tracker LED will show a single green LED on either the L or R sections. 

• Check the Game Master PC to confirm the pairing is complete.

  Back to top

Article Keywords/Phrases: 
Wrist Tracker Pairing
Controller Tracker Pairing
WT Pairing
Controller WT Pairing